TAGLIAVINI ROTOR RT 68, User Manual

Page: 35 / 124

Pag. 35
5 OVEN ASSEMBLY
ATTENTION:
assembly and first oven start-up must be performed by personnel qualified
and authorized by the TAGLIAVINI company.
During oven installation, concerned in force directives and legislation must be respected
and abided, in particular the accident prevention regulations.
5.1 Oven assembly instructions
BEFORE STARTING THE INSTALLATION, THE TECHNICIAN MUST MAKE SURE THAT:
the floor is flat and made from heat-resistant materials;
walls adjacent to the furnace are not flammable, otherwise you must take adequate thermal
precautions, for example, apply heat radiation protections.
ASSEMBLY
unpack
check component integrity
as packaging materials (wood, nails, plastic etc. ) are potential danger sources, make sure none are
left in the vicinity of children and that they're stored in special collection sites, especially pollutants
or non-biodegradable materials.
Position the oven taking care to respect minimum distances indicated in this manual
Assemble the components according to the instructions received from the company
TAGLIAVINI, taking care in particular:
- to use gloves for assembly part handling;
- to perform element between with extreme care, thus minimizing steam loss, as steam could could
be damaging.
Remove protective layer from metal sheets where necessary; if glue traces remain, use a suitable
solvent and dry.
Seal junctions carefully with high temperature resistant silicone.
Place the thermocouple bulb in their special support as indicated by the company.
Always check that the bulb is always deeply introduced into its support.
Install the electrical system by carefully following the wiring diagram.
Do not obstruct ventilation of heat dissipation gaps or openings (such as those placed on the door
and oven's front columns upper and lower sections)
ATTENTION: Rock wool used as an insulating material may cause irritation on contact with
the skin and respiratory system. Use appropriate personal protective equipment including
mask and gloves.
USER ADDRESSED INFORMATION
· Provide the user with information regarding the appliance, its operation and utilisation and the
instruction booklet.
· Take note that changes to installation environment can influence air draft and steam exhaust.