TAGLIAVINI ROTOR RT 68, User Manual

Page: 36 / 124

Pag. 36
Maintenance and use manual
COMBUSTION ROTOR 2018 Ver. 1.1 from 24/06/18
6 OVEN CONNECTION
6.1 Norms, technical regulations and directives
Connecting the oven to energy sources must be conducted in compliance with the rules presented below:
· in force law regulations regarding technical aspects;
· electricity and water supply directives and standard;
· in force safety rules:
· for Italy: Law 37/08
6.2 Oven connection instructions
The oven must be installed in a room compliant with the following regulations.
IMPORTANT
:
the establishment where oven is installed must be complete with openings able to
provide fumes aspirators with necessary air.
If the room where the furnace is operating, other combustion equipment and/or more air aspira -
tors are installed, make sure that air inlet openings have been provided, their size being able to
ensure proper combustion for all the equipment and air exchange rates suitable for the aspira-
tors.
The oven bearing surface must be flat and suitable to support the loads within the prescribed safety mar -
gins. The walls adjacent to the oven should not contain flammable materials, otherwise implement adequate
precautions such as heat radiation protections. Before the technical staff appointed to equipment installa -
tion arrives, the establishment must be provided with all the energy supply connections as indicated in the
diagrams.
IMPORTANT
:
oven connection to power supply, water supply and fireplace exhaust
must be carried out by professional technicians, capable of carrying out operations in compliance
with high standard technical requirements and therefore assume full responsibility, releasing an
appropriate declaration of conformity.
BEFORE EXECUTING THE CONNECTIONS, THE TECHNICIAN MUST MAKE SURE THAT:
·
the establishment is compliant with in force regulations and is equipped, in particular, with a suitable
air inlet suitable for an adequate air exchange rate needed by vapour aspirators;
· the unit's data plate is compatible with power and water supply values;
· the connections have executed as specified in this manual (electricity, water);
· fumes exhaust characteristics match with the requirements;
·
utmost strict compliance with protection requirements is guaranteed.