TAGLIAVINI ROTOR RT 68, User Manual

Page: 9 / 124

Pag. 9
1.4 General warnings
This security symbol identifies imported messages presented throughout this manual. Carefully
reading of the following message is advised in order to prevent malfunctions or accidents.
Read this manual thoroughly before proceeding with the installation, connection, use, maintenance, and other
oven interventions, carefully following instructions and warnings.
In particular,paragraph careful reading and rereading is advised (paragraphs are indicated by the § symbol ):
General safety rules (§ 1.5 ) and safety instructions (§ 10), for adequate knowledge of oven safety devices,
as well as residual risks that the oven presents, in conclusion a correct use of the oven itself. The employer
must provide operators trained for oven safe operation within laboratories where the equipment is installed
and also knowledgeable of general and specific workplace risks; this manual can be a valuable support
for the accomplishment of such a delicate task, even if, for obvious reasons, cannot be considered as an
comprehensive list since it is not strictly related to the oven itself.
Check that all safety devices are present and functioning as described in this manual. If this is not the case
please contact immediately the manufacturer.
This manual should be considered an integral part of the equipment intended for professional use and,
therefore, can never replace user adequate preparation and experience.
As a recommendation keep this document in a dry place, known and accessible to employees. It's always
a good idea store the document in an envelope, allowing protectionist against dust, moisture and light, so
as to ensure its integrity during time until the equipment is disassembled. Keep a copy of this manual in the
oven vicinity so all operators (installer, connection responsible, user, routine maintenance responsible, special
maintenance responsible) may consult the document in a quick and easy way.
The manual contains all the instructions, data, information required by various operators, from installation to
oven disposal with particular reference to safe and proper use, maintenance and cleaning included.
The manual reflects the state of the art technology existing at the time of the oven market release and cannot
be considered inadequate only because it is updated based on new experiences and new technical solutions.
The Manufacturer reserves the right to implement updates to the oven and, consequently, to the present
document , without being required to update previous oven lots, and/or manuals, except in extraordinary cases.
The following professionals must be defined in order to identify tasks and responsibilities.
- Technical personnel responsible for equipment connections : people with certain technical skills
entrusted with equipment connections: electrical, hydraulic and chimney; registered accordingly, and
therefore able to assume full responsibility for their actions.
- Installer : qualified technician who performs oven installation and commissioning in accordance with
instructions contained in this manual.
- User : the one who, after carefully reading the manual, paying particular attention to General safety
rules paragraphs (§ 1.5 ) and safety instructions (§ 10), uses the oven for it's intended purpose.
- Routine maintenance responsible : qualified technician able to carry out oven routine maintenance
operations according to this manual's instructions (§ 9).
- Special maintenance responsible : qualified technician, authorized by the manufacturer, capable of
carrying out special oven maintenance (see example § 9).