TAGLIAVINI ROTOR RT 68, User Manual

Page: 100 / 124

Pag. 100
Maintenance and use manual
COMBUSTION ROTOR 2018 Ver. 1.1 from 24/06/18
Description
Parameter Selection 45 - IMPORT RECIPES, by pressing
ENTER key we are going to import the recipe from a USB
stick that we have inserted into the USB port. Remember
that only .tag files will be imported. Press the ENTER key
only after you have inserted the USB key.
Parameter Selection 46 - AGG. VIDEO CARD, by pressing
the ENTER key, import control unit software updates from
a USB stick inserted into the USB port. This software is
called "VID12 …bin". By pressing the ENTER key the
current version of the SW will be displayed,the one present
on the stick, if the data match, press the OK button
Parameter Selection 47 - AGG. PANEL BOARD, by
pressing the ENTER key go to import power unit software
updates from a USB stick inserted into the USB port. This
software is called "ELEQU… .bin". By pressing the ENTER
key the current version of the SW will be displayed,the one
present on the stick, if the data match, press the OK button
Parameter Selection 48 - RESET, by pressing ENTER key
select where a basic set-up recovery is needed, here we
can perform a reset to:
COOKING CHAMBER - we will reset in this case, all the
control unit data including the hidden settings - the factory
settings. We will reset in this all case the hourly of switching
on of everything the rooms connected between of them.
PRESCRIPTIONS. We will reset and we will cancel in this
case all of the programs of the prescriptions of cooking.