TAGLIAVINI ROTOR RT 68, User Manual

Page: 90 / 124

Pag. 90
Maintenance and use manual
COMBUSTION ROTOR 2018 Ver. 1.1 from 24/06/18
Description
In order to access the scheduled ignition section, the 2
arrow UP-DOWN keys you must pressed and held for at
least 5 seconds with a shut-down controller but with a
connected power supply.
This screen will be accessed by pressing the key on the
lower left side of the calendar figure and the cooking cham -
ber scheduled ignition management section is accessed.
The screen will display a box where we thing is to set the
day of the week scheduled for cooking chamber ignition,
using the UP-DOWN arrows to change the day.
Pressing the ENTER key to switch to the central parameter
that indicates if this is the first or the second power-on of
the day.
Pressing the ENTER key to store the parameter and move
to ignition schedule. The side arrows UP-DOWN are going
to change the ignition value. The four horizontal dashes
indicate that there will be no scheduled ignition for that day.
13.5 Programmed ignition
Press the button with the curved arrow to exit the weekly schedule section. Press the ON/OFF button for 5
seconds to completely exit. Press the key corresponding to the central symbol P-T to change program type
P= permanent and T= temporary. Permanent programming consists of ignition hourly schedule programming
that will last for an indefinite period of time until a new programming is implemented. Temporary programming
consists of an hourly programming that will become priority with respect to the permanent programming but
will have just a 7 day duration. After this time the temporary programming will automatically be cancelled,
the permanent one being again valid. In case you want to temporary program a day during which you do not
want to turn on the oven, store the OFF schedule. Press the button with the curved arrow to exit the weekly
programming section. Press the ON/OFF button for 5 seconds to exit completely.