TAGLIAVINI ROTOR RT 68, User Manual

Page: 38 / 124

Pag. 38
Maintenance and use manual
COMBUSTION ROTOR 2018 Ver. 1.1 from 24/06/18
ATTENTION: NEVER EXCEED 280°C.
ATTENTION: fumes are released after first heating. In order to avoid poisoning:
properly ventilate the oven room and not stand in its vicinity.
IMPORTANT:
When the oven operation comes to an end, we recommend to:
· close the water tap;
and in case automatic operation is not used
· disconnect the oven's power supply by acting on the main switch.
For subsequent ignitions set cooking desired temperature by using the control panel.
7.2 Start-up
1) Operate the wall general switch (residual current device)
2) Insert the switch port locks placed in the electric panel.
3) Press the power button (see § 8 and 9): the lower display will indicate the set temperature, editable by
specific buttons and the larger display will indicate the actual room temperature (usually inferior).
4) Press the button (see § 8 and 9) to power on the burner or coils to begin
oven heating, once the set temperature has been reached, it will stabilize.
5) Check if the steam exhaust valve (see § 12.1 or 12.6 ) is closed (button pushed all the way or
LED corresponding to access closed position).
On first daily power-up, after the oven is heated to desired temperature for about 30 minutes, the oven is
ready for use.