TAGLIAVINI ROTOR RT 68, User Manual

Page: 53 / 124

Pag. 53
These pages provide the information necessary to maintain system safety and prevent possible injury (the oven
was designed and built by respecting the European safety standards or other countries if required).
The oven should be used only by qualified personnel and instructed on its use.
The furnace was built with appropriate measures in order to ensure
the user's and maintenance staff's safety and health
10.1 Safety signs
The shape of the oven and the safety and protection devices adopted are such as to be able to consider the
low oven
risk for the operators.
However, in order to further increase the security level of the kiln itself, signs have been set, of the type
self-adhesive, near particularly dangerous areas or those with residual hazards, with appropriate warnings.
In case of deterioration or removal of such signs, the purchaser is obliged to immediately restore the signs with
identical signs.
In any case, operators are strictly forbidden to remove or tamper with safety signs.
10 SAFETY
The figure on the side shows the pictogram for signaling the danger due to the pres -
ence of live electrical equipment that is fixed on the electrical panel door.
The symbol indicates that live electrical equipment can be inside the electrical cabi-
net of the oven. It is therefore mandatory for the operators to cut off the voltage, by
means of a disconnecting device placed upstream of the switchboard or directly from
the distribution board connected to the oven, before opening the electrical panel.
The figure above shows the sign affixed to the packaging for signaling to pay particular attention to the venti -
lation openings of the room and to carefully read the manual before installing and operating the equipment.