TAGLIAVINI ROTOR RT 68, User Manual

Page: 12 / 124

Pag. 12
Maintenance and use manual
COMBUSTION ROTOR 2018 Ver. 1.1 from 24/06/18
- place the oven at a safe distance from flammable or not low heat resistant surfaces
- place the oven on a flat surface able to support the required loads
- do not operate the oven if you the vapour drain has not been connected In order to rule out
any possible contact with moving parts (impeller), provide the vapour discharge with a pipe,
rigidly fixed and resistant to shocks, with a minimum length of 800 mm
- do not put anything on top of the oven, do not step on the oven
- before performing cleaning or maintenance operations, disconnect the oven from the electric
power supply network and the water supply
- any repair operations, recording, block, adjustment of mechanical parts must be executed
only after the power supply has been disconnected physically and visually in order to avoid
oven start-up, even if it's accidental.
- do not wash the oven using water jets
- in case of oven failure and/or malfunction, disconnect power supply, water supply and refrain
from any attempt to repair or direct intervention. You will need to contact only qualified
personnel
- do not apply accessories that do not comply with safety rules
- perform periodic maintenance as instructed in this manual
Emergency Operations in the event of a fire:
- disconnect the general power supply
- do not use water jets
- use dry powder or foam fire extinguishers.