Pro Pump Controller (ProCon-100)
Rev3.6
2023/07/17
68/70
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
7
Maintenance
This equipment is composed of robot part responsible for motion operation, dispenser responsible for
dispensing and dispenser controller, so regular inspections are required.
In order to prevent malfunctions caused by various factors, please perform occasional(user-determined)
and periodic(within a year) inspections.
Danger
Be sure to take necessary measures such as manual mode of the equipment,
emergency stop, power off, etc. before performing maintenance and inspection. If
the power is not turned off, any material inside the equipment or the inspector
may be detected by the sensor, which may occur movement of the equipment. It
may also cause electric shock.
Caution
Some alarms cannot be released even after reset. In this case, you must reboot
(power on/off) after completing action for the relevant error.
7.1
Part Replacement
As the functional use time of parts becomes long, aging may occur and it may cause the failure of the
equipment. Check regularly for trouble prevention of the equipment, and, in case of abnormality, replace
parts.
