Pro Pump Controller (ProCon-100)
Rev3.6
2023/07/17
22/70
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
5
Functions of Pro Pump Controller (ProCon-100)
5.1
Mode Description
5.1.1
Time Mode
The time mode is used to dispense at the set shot rate for a certain period of time. At it is dispensed at
a certain shot rate for a certain period of time, it is often used in potting. Repeated dispensing is available
for a certain period of time, it’s advantageous for repeated quantitative dispensing
.
Figure 5. Time Mode Main Screen
Table 4. Time mode screen detailed description
Screen
Function and Description
✽
Time
: Displays the mode set
✽
No.01
: Displays the channel
✽
Shot_Time
: Displays the shot time.
(Max. 9999.99sec)
✽
Shot Speed
: Display the pump speed at
dispensing. (Max. 120 rpm)
✽
Suck Time
: Displays the sucking time.
(0sec : Not operating)
✽
Suck Speed
: Displays the pump speed while
sucking. (0~120rpm)
✽
Compensation:
The correction rate for the motor speed.
If you adjust it randomly, the output will
change.
✽
Pressure
: Displays the working pressure.
5.1.2
Steady Mode
Steady mode is used to dispense continuously at the set shot rate.
