Pro Pump Controller (ProCon-100)
Rev3.6
2023/07/17
26/70
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
9
This button can be selected in all modes.
When you press this button, the green LED on the button is lit.
Changeable items are displayed and values can be changed
using the key pad in each mode.
When you press Next button in the screen, you can set suck
back time, suck back speed, compensation, etc.
Once the setup is complete, pressing the button again will
cancel the setup.
10
CHANNEL can be selected in the time mode, steady mode and
metering mode. When you press this button, the green LED on
the button is lit. Channel can be changed using the up/down
buttons.
Press button again to cancel settings.
Change
Value
11
Change the value at the setting screen of each item by using
the up/down buttons, or by touching the input window and
activating the 10 keypad that is displayed.
Press the up button to increase the setting value.
12
Change the value at the setting screen of each item by using
the up/down buttons, or by touching the input window and
activating the 10 keypad that is displayed.
Press the down button to decrease the setting value.
