Pro Pump Controller (ProCon-100)
Rev3.6
2023/07/17
48/70
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
5.6.3
System I/O Check
I/O Check is to check if the controller is operating properly.
Table 11. System I/O Check
Names and Displays
Function and Description
✽
Select Input(Input port) or Output(Output port)
according to the port to be set.
✽
If you want to move to the previous screen, select the
‘Exit’ button
.
✽
If the external input signal(controller
’s rear input
port) is present, it is on. Otherwise, it is off
✽
If you want to move to the previous screen, select
the ‘Exit’ button
.
✽
You can forcibly turn On/Off the external output
signal.
◼
Ready
: On when dispensing is possible
◼
Shot
: On during dispensing
◼
M_ALR
: On when motor or encoder is error
◼
P_ALR
: On when above setting pressure
◼
S_END
: On when dispensing is completed in
time mode
✽
If you want to move to the previous screen, select
the
‘Exit’ button
.
