Pro Pump Controller (ProCon-100)
Rev3.6
2023/07/17
7/70
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
2.
Make sure that terminal connections and wiring are correct. It may cause
malfunction.
3.
While the electric current is being applied, do not change the wiring or detach
the connector. It may cause injury or equipment failure.
4.
If the power wiring in the driving area is wrong, it may cause injury or damage
to the equipment due to malfunction. Be careful.
Precautions on installation
Caution
1.
Do not install, store and use in places exposed to conductive dust, corrosive
gas, flammable gas, high temperature, condensation, wind and rain, etc.
2.
Exposure to direct sunlight for a long time will degrade accuracy of the
equipment. Do not install, store or use in areas where there is direct sunlight.
3.
When installing in an enclosed space, install a separate cooling fan to allow
the outside air to flow in and out, in order to maintain the temperature around
the equipment at 40
℃
or less. Overheating may cause fire or other accidents.
Precautions on use
Caution
1.
Never modify this equipment. It may cause electric shock, injury, fire or
breakdown.
2.
Once you modify this equipment, it cannot be covered by our warranty for
defects.
3.
Before use, be sure to check that all covers are properly installed and verify if
there is no foreign material inside the equipment. Depending on the
circumstances, unexpected operation can occur and may result in injury.
4.
If an alarm occurs during use, remove the cause of the alarm, check the safety,
and reuse it.
Danger
1.
When the equipment of our company is used including robots (multi-joint
robot, rectangular coordinate robot, desktop robot), please be sure to install
a safety net in the robot operation area, and never approach the operation
area during operation.
