Pro Pump Controller (ProCon-100)
Rev3.6
2023/07/17
25/70
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
5.2
Setting Button
Procon-100 has a total of 9 setup buttons(4~12) at the front.
Figure 8. Procon-100 Touch Panel & Setup Buttons
Table 7. Function of the Controller Setup Button
Category
NO.
Item
Function
Mode
Setting
4
It is the time mode button, which changes the time mode when
pressed.
5
It is the steady mode button, which changes the steady mode
when pressed.
6
It is the metering mode button, which changes the metering
mode when pressed.
Select a
Change
7
S.V Time(Set Value, Time) button can be selected in the time
mode and the metering mode.
When you press this button, the green LED on the button is lit.
The time or volume can be changed using the up/down
buttons.
Press button again to cancel settings.
8
Speed buttons are selectable for all modes.
When you press this button, the green LED on the button is lit
and the shot speed item is turned off.
The speed can be changed using the up/down buttons.
Press button again to cancel settings.
