Transfer
225 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
Transfer
To perform unscreened transfer of an established call:
1. During the call, press one of the following:
• the
[Transfer]
soft key
• a pre-programmed Transfer button (see
page 226
)
2. This places the first party on hold and gives you a second dial tone.
3. Dial the Transfer destination number.
4. Press
OK
or
[Send]
.
5. Press the
[Transfer]
soft key or the pre-programmed Transfer button again.When you hang up, you are disconnected
from the call.