manualshive.com logo in svg

Tadiran Telecom T328, User Manual

The AGP T328 Instruction Manual is available for free download on our website. This comprehensive manual provides detailed, step-by-step instructions on how to set up and use the AGP T328 product. Get the most out of your device by downloading the manual from manualshive.com.

Share
Download
background image

Freedom (IRSS)

149 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)

Freedom (IRSS)

Placing Freedom calls:

•

For Freedom calls placed from phones that send Caller ID, the Freedom feature must be enabled at your Coral station. 
See steps below. 

•

For Freedom calls placed from phones that do not send Caller ID information, the Freedom feature must be enabled 
using the Executive Privilege feature. See 

page 150

.

To place a call from a Freedom phone providing Caller ID:

1. Place a call to your Coral station. 

2. Listen for a distinctive dial tone.

3. Dial your four-digit passcode (if required by Class of Service).

4. Listen for dial tone.

5. Dial the required destination number. 

Possible destinations include: 

external number (stationary or cellular), network number, or a Coral destination, 

including station, trunk/trunk group, dial service, routing access, public/private library, or voice mail

.

Notes:  1) If your destination is an external number, it should be preceded by an external line access code.

2) If your destination is voice mail (IVR access code), skip to 

page 153

.

3) If your destination is a FlexiCall All feature, skip to 

page 154

.

4) To enable another Freedom phone, skip to 

page 155

.

6. Listen for the ringback tone.

7. Wait for an answer.

8. You can activate any of the options described in the table on 

page 151

.

Summary of Contents for T328






























































































































































































































































Reviews:

No comments

Related manuals for T328

O2 XM User Manual preview
XM
Brand: O2 Pages: 72
i.safe MOBILE IS330.1 Quick Start Manual preview
IS330.1
Brand: i.safe MOBILE Pages: 21
Unihertz Jelly User Manual preview
Jelly
Brand: Unihertz Pages: 97
Kyocera Sprint Torque Booklet preview
Sprint Torque
Brand: Kyocera Pages: 32
HTC Desire Z Quick Manual preview
Desire Z
Brand: HTC Pages: 16
myPhone Prime 5 User Manual preview
Prime 5
Brand: myPhone Pages: 2
HTC S710D Manual preview
S710D
Brand: HTC Pages: 82
Docomo F-07E Instruction Manual preview
F-07E
Brand: Docomo Pages: 228
Sonim XP3 Quest Quick Start Manual preview
XP3 Quest
Brand: Sonim Pages: 1
Micromax X512 User Manual preview
X512
Brand: Micromax Pages: 18
Allworx 24x How To Configure preview
24x
Brand: Allworx Pages: 6
Blu STUDIO ENERGY 2 User Manual preview
STUDIO ENERGY 2
Brand: Blu Pages: 20
Cellacom T131 User Manual preview
T131
Brand: Cellacom Pages: 22
Blu Neo S231T Manual preview
Neo S231T
Brand: Blu Pages: 10
Teledex SIP DECT Series Specifications preview
SIP DECT Series
Brand: Teledex Pages: 1
Zte cymbal Z-320 User Manual preview
cymbal Z-320
Brand: Zte Pages: 99
DBTEL 6668 User Manual preview
6668
Brand: DBTEL Pages: 58
Zte R239 User Manual preview
R239
Brand: Zte Pages: 33

Brands by name

Popular brands

Load more brands