Tadiran Telecom EMERALD ICE, Installation Manual

Page: 147 / 154

Emerald ICE HD Voicemail Installation Manual
15-3
Backup
&
Restor
e
Pr
ocedur
es
15
Step 3 ‐ enter the backup job parameters
1. Type CD \UTILS and press the
R
key
2. Type the required Backup command as follows, then press the
R
key:
USAGE: IOM ‐ BACK [drive] [directory] (i.e. IOM ‐ BACK E smithco) where:
[directory] is the directory name where to store the data, up to eight
characters in length. DO NOT include a backslash or drive letter as part of the
directory name.
[drive] this is the drive letter assigned to the storage unit when the GUEST
program is run. DO NOT include any characters other than the actual drive
letter. i.e. E not E:
The Backup procedure will now start and run to completion without any further
user input. Backup time will vary depending on the number of messages in the
system.
External Drive
Step 1 ‐ exit the ICE HD Voicemail system to DOS:
1. Press ! at the Status screen and enter the system password (default is 1234).
2. Press
7
for System Shutdown.
3. Press either ! or ) as desired.
Step 2 ‐ activate the device:
1. Connect the CD ‐ R drive cable to the 25 pin parallel port connector located
on the front of the card
2. Connect the power cord to the CD ‐ R drive ‐ the power light should come
on.
3. Insert the desired CD ‐ R disk into the drive.
4. Type CD \BPPD and press the
R
key.
5. Type LOADCD and press the
R
key.
15.5
Backpack CD-R