Tadiran Telecom EMERALD ICE, Installation Manual

Page: 117 / 154

Emerald ICE HD Voicemail Installation Manual
12-5
Mailbox
Gr
ou
p
Adm
inistr
ation
12
While entering the mailboxes, watch the bottom of the screen for
confirmation of your entries. If the mailbox number is valid, you will see:
[ICE]: 0000xxx(xxx=mailbox number entered). If the number you enter does
not have a mailbox in the system, you will see: [0000xxx]: Cannot be found
(xxx=mailbox number entered) . Check the mailbox number and try again. If
it still does not verify, you can always create the mailbox when you are done
here and then add it to the group later. The system also eliminates any
duplicated numbers when the record is saved.
Undefined mailbox numbers are not saved. The system will prompt you as
follows: Error [ X Mailbox(es) Could Not Be Found] Press
R
to clear
the message. Press
E
to return to the Main Menu. The system also
eliminates any duplicated numbers when the record is saved.
6. When finished, press
5
to save the group list. The system prompts:
“Save Screen Information ? (Y/N).” Press Y to save your changes.
Deleting a System Group List
To delete an entire System Group:
1. Enter system programming by pressing
1
from the Main Status Screen
and entering the system password (default=1234).
2. Press
5
for Group List Management .
3. In the Group ‐ No field, enter the group list number (must be between 30
and 79), and press
R
. The screen will fill with the corresponding
entries.
4. Verify that this is the group you wish to delete. If it is correct, press
6
5. The system will prompt you to verify the deletion: “ Erase This Group ...?
(Y/N)”
6. Press Y to delete the group or N to cancel the operation
7. Press
E
to return to the Main Status Screen.