Tadiran Telecom Emerald ICD Deluxe User Manual Download

Page: 73 / 113

Emerald ICE Deluxe Telephone User Guide

3-13

Maki

ng Ca

lls

Feature Code:

PGM

Description

The

Last Number Redial

feature, or LNR, automatically dials the last number dialed

from your telephone. The LNR retains up to sixteen (16) digits. You may either
choose a specific outside line by first pressing that outside line button or you can
allow the line to be selected automatically by the LNR feature.

Choose an Outside Line First

1. Press an outside line button.

2. Press

PGM

Automatically Select an Outside Line

1. Press

PGM

Operational Notes

•

Last Number Redial

doesn’t operate with intercom calls.

•

The LNR feature code can be programmed on a Feature/DSS Button.

•

LNR will dial the speed dial number and any subsequent manually dialed
digits.

•

In the event that all CO lines are busy you will hear busy tone and your tele-
phone will display:

•

If the Last Number Redial memory is empty you will hear error tone and the
telephone will display:

3.9

Last Number Redial

ALL CO LNS BUSY

LNR EMPTY

Summary of Contents for Emerald ICD Deluxe


















































































































Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands

Tadiran Telecom Emerald ICD Deluxe, User Manual

Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands