Tadiran Telecom Emerald ICD Deluxe User Manual Download

Page: 31 / 113

Emerald ICE Deluxe Telephone User Guide

2-21

e S

Operational Notes

•

You can at any time exit the

Caller ID Log

mode.

•

Proper programming of local area code(s) and long distance prefix are
required to assure accurate redial of CID numbers from the Caller ID Table.

•

If no name is delivered from the telephone company, the number only will be
displayed.

•

Any Deluxe Telephone user can review the Caller ID Table if the Attendant
Password is known (default password = 9999), but the table can be reviewed
by only one telephone at a time.

Feature Code:

PGM

p69

Description

The

Default Set

feature can be used to clear all active settings at your extension

(

Call Forward

DND

, etc.)

1. Press

PGM

p69

2. The display shows the following screen to confirm the intention:

3. Press

[go]

to invoke the operation.

4. A confirmation tone will be played.

2.10

Default Extension

DEFAULT SET

Summary of Contents for Emerald ICD Deluxe


















































































































Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands

Tadiran Telecom Emerald ICD Deluxe, User Manual

Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands