Tadiran Telecom Emerald ICD Deluxe User Manual Download

Page: 110 / 113

4-32

Emerald ICE Deluxe Telephone User Guide

Cal

ling

Featur

Feature Code:

PGM

p67

Description

The

Silent Record

feature, when invoked, will record a conversation. An

Emerald

ICE

Voicemail module must be installed and operating for the

Silent Record

feature

to operate.

1. Dial an extension.

2. After the dialed extension picks up the call, enter

PGM

p67

or press

the Feature/DSS Button that has been programmed for this feature. The
display will show:

3. Hang up to stop recording.

Operational Notes

•

The extension must be programmed in the database by the Administrator to
allow

Silent Record.

•

Emerald ICE

Voicemail system must be installed and active for

Silent

Record

to operate.

4.26

Silent Record

RECORDING

Summary of Contents for Emerald ICD Deluxe


















































































































Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands

Tadiran Telecom Emerald ICD Deluxe, User Manual

Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands