Tadiran Telecom Emerald ICD Deluxe User Manual Download

Page: 28 / 113

2-18

Emerald ICE Deluxe Telephone User Guide

e S

6. You hear a confirmation tone and the extension returns to idle. The display

shows:

Delete Forward

1. Press the middle Interactive Soft Button (under the

FWD

in the display).

2. Each active mode of forward will be displayed, e.g.:

3. If you want to delete this forward, press

[del]

Or…

4. Press

[more]

for other active forward settings.

Operational Notes

•

Regardless of whether the extension where calls are being forwarded is a
Deluxe Telephone or single line telephone, the user at the forwarded exten-
sion will hear special Intercom Reminder tone signifying that

Call Forward

activated.

•

The Status Bar light will not light green in call forward mode if that function.

•

External Call Forward

will forward only transferred CO Line calls.

FORWARD FROM XXX

BUSY FWD. XXX

del more

Summary of Contents for Emerald ICD Deluxe


















































































































Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands

Tadiran Telecom Emerald ICD Deluxe, User Manual

Search results

Summary of Contents for Emerald ICD Deluxe

Reviews:

Related manuals for Emerald ICD Deluxe

Brands by name

Popular brands