Synectix EZ VMS Lite, User Manual

Page: 17 / 78

EZ VMS Lite
1.3.2.1 Pager Display String
The string that you enter under this option is sent to the Pager when an external Pager
notification has been enabled for a Mailbox and this string appears on the screen of the
Pager to indicate that the notification was sent by the
EZ VMS Lite .
In this field, you are allowed to enter a total of 11 characters. This character-set may
consist of digits and ‘*’. The first character of the pager display string cannot be ‘*’. If
your pager display string does not contain 11 characters, (say, it is 7 character-long),
press # to terminate your entry.
Note : You must check with your Paging Service Provider if any specific string restrictions
are applicable (e.g. numeric only etc.)
1.3.2.2 No. Of Retries
This is the number of times the EZ VMS Lite tries to externally notify a New Message.
Valid digits are 0 to 6. (If 0 is programmed, the unit will not retry at all).
1.3.2.3 Trunk Access Key
Trunk Access Key is also known as the ‘Out Dial Digit’. This is the digit (or digits) to be
dialed before dialing an external number. It may be a single digit or 2 digits and may also
contain a Pause additionally. This information must be entered before attempting an
External Notification. This field may also be left blank, in which case no digits are dialed.
1.3.2.4 Answer Detection Time
This is the amount of time for which the EZ VMS Lite will wait to detect a voice frame to
decide that the call has been answered.
You may enter any value between 01 and 29. (This value must be entered in two-digit
format). The actual Answer Detection time is equal to the entered value multiplied by 33
milliseconds. The Unit does not accept any value outside the range of 1 to 29.
Note: The Answer Detection time must be carefully set for each installation keeping in
mind the type of lines and services available at that location.
1.3.2.5 Time Before No-Answer
It varies from 1 to 19 (both inclusive). You have to enter this value in two-digit format.
The value chosen by you is multiplied by 3 Seconds by the Unit. The Unit does not accept
any value that is outside the range of 1 to 19.
1.3.3 Extension Options
‘Extension Options’ includes single digit plan, creation and deletion of various kinds of
extensions (Invalid Extensions, operator extensions, fax extensions etc.),
enabling/disabling ‘Extension prompting while transferring’ feature. All these are
Extensions without Mailboxes.
16