Symphony C-I-CV43C, Instruction

Page: 95 / 174

PR9 - 2 WBPEEUI220772A0
Procedure
□
3. Place the module in the proper rails.
□
4. Push gently on the module until the edge connector on the
module is firmly seated in the connector on the backplane.
□
5. Press on the tabs at the side of the module to secure it in
the multibus card cage.
□
6. Connect the appropriate cables to the module.
□
7. Slide the card retainers toward the center of the multibus
card cage until they are stopped by the screws.
□
8. Use the bladed screwdriver to tighten the screws on each of
the card retainers.
□
9. Install the clear polycarbonate shield onto the front of the
multibus card cage.