Symphony C-I-CV43C, Instruction

Page: 104 / 174

WBPEEUI220772A0 PR13 - 1
PR13
Keyboard Interface Device
Installation
Purpose/Scope
This procedure explains how install keyboard interface
devices. This includes the engineering (QWERTY) keyboard,
the operator (Mylar) keyboard, the pointing device (mouse or
trackball) and the table top ADP panel (IIADP01).
Parts
Tools None.
Procedure
□
1. Plug the Mylar (operator) keyboard into the port marked
KEYBOARD on the keyboard interface assembly (Fig.
PR13-1 ).
□
2. Plug the QWERTY (engineering) keyboard into the port
marked AUX KBD on the keyboard interface assembly.
□
3. Plug the pointing device into the port marked MOUSE/
TRACKBALL on the keyboard interface assembly.
□
4. Plug the table top ADP panel into the port marked AUX 1
PORT on the keyboard interface assembly using the ADP cable.
□
5. Refer to Figure PR13-2 and connect additional ADP panels
as shown, using additional ADP cables to do so.
NOTE: The ADP panels are sequential. An ADP panel cannot be assigned an
address of two without a previous ADP panel being assigned an address of
one. The console mounted ADP panel is assigned an address of one, so the
first table top ADP panel must be assigned an address of two.
10 min.
Number Qty Description
6638514?1 1 Keyboard, operator (Mylar)
IIAKB03A 1 Keyboard, QWERTY (auxiliary engineering)
IIAMS04A 1 Mouse
IIATB05 1 Trackball
IIADP01 A/R Annunciator display panel, table top
1948978?1 A/R Cable, ADP