Symphony C-I-CV43C, Instruction

Page: 166 / 174

WBPEEUI220772A0 PR41 - 1
PR41
Lower Monitor Installation
Purpose/Scope
This procedure explains how to install the lower monitor.
Parts
Tools
•
¾-inch open end wrench.
•
Bladed screwdriver.
Safety Considerations
Procedure
□
1. Verify that the main power on the PEP is in the off position.
Check the power indicator to see if power is removed.
□
2. Protect the monitor screen and set the screen on a solid,
flat, protective surface.
□
3. Use the bladed screwdriver to install the four screws that
attach the monitor mounting tray to the monitor.
□
4. Install the fan assembly.
□
5. Install the cables to the rear of the fan assembly.
10 min.
Number Qty Description
1948623?9
1
1 Monitor, 19 in.
NOTE:
1. This part is not needed if this procedure is part of touchscreen replacement.
WARNING
1. There are exposed AC and DC connections inside the cabi-
net. These exposed electrical connections present a shock
hazard that can cause injury or death.
2. The monitor will slide out by itself when the mounting hard-
ware is removed. The monitor weighs approximately 27 kilo-
grams (60 pounds) and can cause bodily injury if it is allowed
to slide out by itself. Support the monitor before removing the
hardware.
W1