Symmetricom TimeSource 3600, Manual

Page: 30 / 254

30
TimeSource 3600
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
Eight Additional E1 or Analog Outputs
(990-72060-02 Systems Only)
This option provides a module for eight additional E1 or analog
(2.048 MHz) outputs. The module mounts in the OPTIONS I/O
mountings on the connector panel. These outputs function the
same as the standard E1 outputs.
TOD Output
The BesTime Ensemble Timing Generator provides the timing for
the TOD timing signal available at the RJ-45 connector, which
provides time code to devices compatible with NTP Type 4 or Cisco
format.
IRIG-B TOD Outputs
(990-72060-05 Systems Only)
This option provides a module for four additional TOD outputs in
IRIG-B format. The module mounts in the OPTIONS I/O
mountings on the connector panel.
The BesTime Ensemble Timing Generator provides the timing for
the TOD timing signal, which provides timing code to devices
compatible with IRIG-B.
1 PPS Output
The BesTime Ensemble Timing Generator provides the timing for
the 1 pulse-per-second timing signal available at the 1 PPS
connector, which can be used for application-specific
requirements. This signal is not squelched during an alarm.