Symmetricom TimeSource 3600, Manual

Page: 168 / 254

168
TimeSource 3600
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
Retrieve Communication (cont’d)
The parameters which may be displayed in the <spec_block> are
listed below.
Parameter Value Description
MONMSG=a a = ALW View messages from all por ts
a = INH View messages from this por t only
KEEPALIVE=a a = 1 to 255 Inactive minutes until the unit sends a
COMPLD message to keep the
connection from being closed
a = 0 No COMPLD message is output
ENDOFTEXT=a a = 1 to 9F Hex code at end of all responses
a = 00 No hex code at end of responses
ECHO=a a = ALW Echoes characters received so they appear
on the user’s screen as typed
a = INH Local echo is disabled
COMPRI=a a = ALW0 TL1 commands and responses, no
autonomous messages sent
a = ALW1 TL1 commands and responses, sends
autonomous messages
a = ALW2 TL1 commands and responses, sends
autonomous messages whether or not
logged on
a = INH Closes connection, logs off a user (if
logged on), and keeps por t from use (a
por t cannot close itself)