Symmetricom TimeSource 3600, Manual

Page: 144 / 254

144
TimeSource 3600
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
Edit Communication
This command changes communication port parameters. The
command format is:
ED-COM:[<tid>]:<aid>:<ctag>:::<spec_block>;
Notes:
1. Ethernet ports 5001, 5002, 5003, and 5004 are set up to act as
serial communication ports, so that a terminal program on a
computer connected to these ports can communicate
effectively.
2. Ethernet port 5551 is set up to allow an element manager to
connect with it for TL1 commands and responses. TL1
autonomous messages are sent through port 5550, which
connects to an element manager to send one or a group of
autonomous messages, then disconnects. Port 5550 is not to be
reconfigured.
Aid Value Item Addressed
COM-a a = 1 Serial communication por t 1 (COM1)
a = 2 Serial communication por t 2 (COM2)
a = 3 Serial communication por t 3 (Craft)
a = 5001 Ethernet user interface por t 5001 (Note 1)
a = 5002 Ethernet user interface por t 5002 (Note 1)
a = 5003 Ethernet user interface por t 5003 (Note 1)
a = 5004 Ethernet user interface por t 5004 (Note 1)
a = 5551 Ethernet element manager interface por t 5551 (Note 2)