Symmetricom TimeSource 3600, Manual

Page: 109 / 254

3
Installation
109
4
5
3
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
18 If UTC time is not desired, skip to Step 19. Use the Edit Date command to set the
system for UTC time.
ED-DAT:::<ctag>::yyyy-mm-dd:MODE=UTC;
yyyy= year (yyyy = 2000 to 2099)
mm = month (mm = 01 to 12)
dd = day (dd = 01 to 31)
Example command to set UTC time:
ED-DAT:::123::2000-06-15:MODE=UTC;
19 Use the Retrieve Equipment command to identify whether and how the inputs
have been provisioned.
RTRV-EQPT::ALL:<ctag>;
Notes:
1. Observe those results with an <aid> of SPAN-a. If MONITOR=ALW appears
for an input, that input has previously been entered. If ENSEMBLER=ALW
appears for an input, that input has been set to be ensembled.
2. Note the results of the Retrieve Equipment command to set the remaining
parameters in this procedure.
3. Factory default settings are found at the end of this Power Up procedure
section.
20 If the results of Step 19 indicate the span inputs (if used) are set as desired, skip to
Step 24. Use the Enter Equipment command to monitor each available span input,
and to specify whether those inputs are to be ensembled.
ENT-EQPT::SPAN-a:<ctag>:::ENSEMBLER=b;
a = span input (a = A or B)
b = whether this input is ensembled (b = ALW ensembles the input;
b = INH inhibits the input from being ensembled)
Procedure G. Power Up (cont’d)
Step Procedure