Symmetricom TimeSource 3600, Manual

Page: 130 / 254

130
TimeSource 3600
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
<tid> Target identifier of the equipment to which the command is directed. The tid
must be a valid TL1 identifier of a maximum of 20 characters (limited to letters,
digits, and hyphens) beginning with a letter. The <tid> is recommended to be
the target's CLLI code, and can also be used as the <sid>. The <tid> can be null
if the OS directly interfaces to the target. The <tid> can be omitted only if
connection is made directly to a single TimeSource 3600 Shelf.
<time> Current time in the six-digit form: hh-mm-ss (command) or hh:mm:ss (response
or message), where hh is hours (00 to 23), mm is minutes (00 to 59), and ss is
seconds (00 to 59). For example, 5:11:49 a.m. is 05:11:49.
<uap> User access level, used by a system administrator to assign a given level of
access to system users. User access level ranges from 1 to 5, with 1 being the
lowest access level, and 5 being the highest access level.
<uid> User identifier, factory-set to TELECOM. The <uid> contains alphanumeric,
case-insensitive strings of 6 to 10 characters provisioned as valid login IDs.
<uout> User inactivity password which indicates the number of days a system user has
not logged on to the system. The user inactivity timeout range is 0 to 180 days,
with 0 indicating no timeout.
<utc> Universal Coordinated Time (UTC) in the 6-digit form: hh-mm-ss, where hh is
hours (00 to 23), mm is minutes (00 to 59), and ss is seconds (00 to 59). For
example, 2:34 pm is 14-34-00.
<vldty> Validity of the performance monitoring data.
Table I. Parameter Definitions (cont’d)
Parameter Definition