manualshive.com logo in svg

Symmetricom TimeProvider 2300, User Manual

Share
Download
Symmetricom TimeProvider 2300 User Manual Download Page 226

226

TimeProvider 2300/2700 User’s Guide

098-00564-000 Revision A3 – July, 2013

Chapter 4  Provisioning
Setting the System Date and Time

Figure 4-23.  Output Generation Behavior Commands

Example:

To provision the port 1 output behavior as squelch for the warm-up state, squelch for 
the free-run state, ON for the holdover state, and AIS for the fast-track state:

1. Login at the Admin or Config-user level.

2. Type 

set output-gen warm-up t1e1 squelch 

and press 

Enter

.

3. Type 

set output-gen free-run t1e1 squelch 

and press 

Enter

.

4. Type 

set output-gen holdover t1e1 on 

and press 

Enter

.

5. Type 

set output-gen fast-track t1e1 ais 

and press 

Enter

.

Setting the System Date and Time

The TimeProvider 2300/2700 Time of Day can be set either by an external source, 
or manually with the “set clock” command. You can set the time and date only for 
the frequency references.

Example

1. Login at the Admin or Config-user level (see 

Logging In

, on page 185).

2. Type 

show ref status 

and press 

Enter

 to check the reference mode.

Summary of Contents for TimeProvider 2300



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands