manualshive.com logo in svg

Symmetricom TimeProvider 2300, User Manual

Share
Download
Symmetricom TimeProvider 2300 User Manual Download Page 335

098-00564-000 Revision A3 – July, 2013

TimeProvider 2300/2700 User’s Guide

335

Appendix D Software Licenses

This product contains licensed third party software, including software available 
under the GPL licensing scheme. You can obtain these licenses and the 
open-source software by contacting Symmetricom Technical support at the 
following numbers:

Worldwide (Main Number): 1-408-428-7907

USA, Canada, Latin America including Caribbean, Pacific Rim including Asia, 
Australia and New Zealand: 1-408-428-7907 

USA toll-free: 1-888-367-7966 (1-888-FOR-SYMM) 

Europe, Middle East & Africa: 49 700 32886435

An administrative fee may be charged to obtain the source code.

By using the TimeProvider 2300/2700, the user agrees to the terms of these 
licenses.

In This Appendix

Third-Party Software

Summary of Contents for TimeProvider 2300



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands