manualshive.com logo in svg

Symmetricom TimeProvider 2300, User Manual

Share
Download
Symmetricom TimeProvider 2300 User Manual Download Page 102

102

TimeProvider 2300/2700 User’s Guide

098-00564-000 Revision A3 – July, 2013

Chapter 3  
TimeProvider 2300/2700 CLI Command Set

Command Syntax:

To enter a license key for new features:

set license add 

The TP 2300/2700 will prompt for the license key and the user needs to enter the 
40-character key string.

To remove an installed feature license:

set license delete 

The TP 2300/2700 will respond with all installed features that can be deleted. The 
user chooses from the list for the feature to delete 

Example 1:

To add a feature with a license key value of 
“ABCDEFGHIJ1234567890KLMNOPQRST0987654321”:

TP2700> set license add 

The TP 2300/2700 will prompt for the license key:

License key: ABCDEFGHIJ1234567890KLMNOPQRST0987654321

Example 2:

To delete the PTP_INPUT license:

TP2700> set license delete

The TP 2300/2700 will prompt the user with a list of features that can be deleted.

Note:

 When a feature license is deleted, the feature will still function 

until the next reboot. 

Reinstalling the license key with the “set license add” command will 
enable the feature again.

Note:

 

Feature licenses require a valid key. The key shown in 

this example is intended to illustrate the concept.

Summary of Contents for TimeProvider 2300



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands