188
TimeProvider 2300/2700 User’s Guide
098-00564-000 Revision A3 – July, 2013
Chapter 4 Provisioning
Managing the User Access List
Changing a User’s Access Level
To change a user’s access level you must delete and then re-create the user. This
also provides an opportunity to change the password, if desired. Use the following
procedure to change the access level to “admin” for user “tester123”:
1. Login at the Admin level (see
2. Type
show user
and press
Enter
to view the current list of users.
3. Type
set user delete tester123
and press
Enter
.
4. Type
set user add name set user add name tester123 access-level
admin
and press
Enter.
The system will respond with:
For user password, only chars {a-z, A-Z, 0-9, ! ( ) - _ . ? ~ *}
are accepted
Password:
5. Type a password and press
Enter
. The password you enter will be the log-in
password for the user. The system responds with:
Confirm Password:
6. Retype the password and press
Enter
. The system responds with:
CLI user has been added: tester123
7. Type
show user
and press
Enter
to verify that the account exists.
8. Repeat Steps 3 through 7 to modify other user access levels.
Note:
User passwords can consist of alphanumeric characters, “~”, “*”, “(“,
“)”, “!”, “?”, “-”, “_”, and “.” with a minimum of 8 characters and a
maximum of 32 characters.
Usernames can consist of numbers, upper and lower case letters,
dash "-", and underscore "_", with a maximum of 20 characters.
Usernames cannot use a leading dash “-” or underscore "_" as the
first character.
For a description of user access levels, see
