manualshive.com logo in svg

Symmetricom TimeProvider 2300, User Manual

Share
Download
Symmetricom TimeProvider 2300 User Manual Download Page 103

098-00564-000 Revision A3 – July, 2013

TimeProvider 2300/2700 User’s Guide

103

Chapter 3  

TimeProvider 2300/2700 CLI Command Set

ptp-input

- Precision Time Protocol Input

t1-e1

- TDM (T1/E1) with Input and Output

ptp-client-capacity-64 - PTP Master with max capacity of 64

clients

syncE

- Synchronous Ethernet Input and

Output

ptp-master

- PTP Master functionality

Enter License Feature to be deleted:

Select the feature to be deleted from the list and press 

Enter

. The TP 2300/2700 

will prompt the user to verify that the license is to be deleted.

Are you sure you want to delete this license? (Yes | No) 

Select “Yes” and press 

Enter

.

Level :

Admin

Summary of Contents for TimeProvider 2300



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands