manualshive.com logo in svg

Symmetricom TimeProvider 2300, User Manual

Share
Download
Symmetricom TimeProvider 2300 User Manual Download Page 270

270

TimeProvider 2300/2700 User’s Guide

098-00564-000 Revision A3 – July, 2013

Chapter 5  Maintenance and Troubleshooting
Returning the TimeProvider 2300/2700

Returning the TimeProvider 2300/2700

You should return the equipment to Symmetricom only after you have exhausted the 
troubleshooting procedures described earlier in this chapter, or if Symmetricom 
Global Services has advised you to return the unit.

Repacking the Unit

Return all units in the original packaging. If the original packaging is not available, 
contact Symmetricom Global Services. Use standard packing procedures for 
products being returned for repair to protect the equipment during shipment. 
Connectors should be protected with connector covers or the equipment should be 
wrapped in plastic before packaging. Ensure that the display and connectivity 
panels are protected when packaged.

Equipment Return Procedure

To return equipment to Symmetricom for repair:

1. Call Symmetricom Global Services (SGS) at 888-367-7966 (toll-free in USA 

only), 408-428-7907, or +49 700 3288 6435 in Europe, Middle East, or Africa to 
obtain a return material authorization number (RMA) before returning the product 
for service.

You can request an RMA on the internet at

www.symmetricom.com/Support/req_repair.htm

.

Retain the assigned RMA number for future reference.

2. Provide a description of the problem, product item number, serial number, and 

warranty expiration date.

3. Provide the return shipping information (customer field contact, address, 

telephone number, and so forth.)

4. Ship the product to Symmetricom, transportation prepaid and insured, with the 

Return Material Authorization (RMA) number and item numbers or part numbers 
clearly marked on the outside of the container to the address given with the RMA.

Repaired equipment is returned to you with shipping costs prepaid by 
Symmetricom.

Note:

 Please retain the original packaging for re-shipping the 

product. If the original packaging is not available, contact 
Symmetricom Global Services (SGS) for assistance.

Summary of Contents for TimeProvider 2300



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands