Symantec NetBackup 5020 Routine Maintenance Download Page 41

Page: 41 / 60

NetBackup 5020
Routine Maintenance

4 Guide to the Routine Maintenance Using the System

Monitor Interface

Issue 01 (2010-12-10)

Symantec Corporation

4-11

Figure 4-11

RAID group status

Table 4-4

Description of parameters related to the RAID group status

Parameter

Description

Name

The name of the RAID group.

Status

A RAID group may be in the one of the following states:



Optimal

indicates that the RAID group is normal.



Degraded

indicates that the RAID group is degraded.

Capacity

The capacity of the RAID group. Unit:

Type

The level of the RAID group.



The level of a RAID group that consists of system disks is

RAID



The level of a RAID group that consists of data disks is

RAID 6

Disks

The disks included in the RAID group. The numbers displayed on
the interface are the slot numbers of the corresponding disks.



System disks : disk 0 and disk 1.



Data disks : disk 4 to disk 23.

NOTE

For details on the slot number of a disk, see "Panel" in the

NetBackup 5020

Product Description

Summary of Contents for NetBackup 5020





























































Search results

Summary of Contents for NetBackup 5020

Reviews:

Related manuals for NetBackup 5020

Brands by name

Popular brands

Symantec NetBackup 5020, Routine Maintenance

Search results

Summary of Contents for NetBackup 5020

Reviews:

Related manuals for NetBackup 5020

Brands by name

Popular brands