4 Guide to the Routine Maintenance Using the System
Monitor Interface
NetBackup 5020
Routine Maintenance
4-2
Symantec Corporation Issue 01 (2010-12-10)
4.1 Viewing Hardware Alerts
This section describes how to view hardware alerts on the system monitoring interface of the
NetBackup 5020 management software. By viewing current hardware alerts, you can know
whether errors occur on the hardware and timely correct the errors.
Impact on the System
None.
Reference Standard
None.
Procedure
Step 1
Log in to the system monitoring interface.
1.
Open a browser on a Windows PC. Enter https://
xxx.xxx.xxx.xxx
in the address bar (the
xxx.xxx.xxx.xxx
is the IP address of the service network port of the NetBackup 5020).
Press
Enter
and the login interface is displayed, as shown in
Figure 4-1
Login interface
2.
Enter the user name and password respectively in the
User Name
and
Password
text
boxes.
The default user name and password are respectively
root
and
root
.
3.
Click
Log on
and the main interface of the NetBackup 5020 is displayed, as shown in
