Symantec NetBackup 5020, Routine Maintenance

Page: 31 / 60

NetBackup 5020
Routine Maintenance 4 Guide to the Routine Maintenance Using the System
Monitor Interface
Issue 01 (2010-12-10) Symantec Corporation 4-1
4
Guide to the Routine Maintenance Using
the System Monitor Interface
About This Chapter
This section describes the maintenance items using the system monitor interface, including
viewing alarms and querying hardware status.
4.1 Viewing Hardware Alerts
This section describes how to view hardware alerts on the system monitoring interface of the
NetBackup 5020 management software. By viewing current hardware alerts, you can know
whether errors occur on the hardware and timely correct the errors.
4.2 Checking the CPU Status
This section describes how to check the CPU status on the system monitoring interface. By
checking the status of the CPU, you can know whether the CPU works normally.
4.3 Viewing the Disk Status
This section describes how to check the disk status on the system monitoring interface. By
checking the disk status, you can know whether the disk works normally.
4.4 Check the RAID Group Status
This section describes how to check the RAID group status on the system monitoring
interface. By checking the RAID group status, you can know whether the RAID group works
normally.
4.5 Checking the Fan Status
This section describes how to check the fan status on the system monitoring interface. By
checking the fan status, you can know whether the fan works normally.
4.6 Checking the Power Supply Status
This section describes how to check the power supply status on the system monitoring
interface. By checking the power supply status, you can know whether the power supply
works normally.
4.7 Checking Temperature
This section describes how to check the temperature on the system monitoring interface.