Symantec NetBackup 5020 Routine Maintenance Download Page 42

Page: 42 / 60

4 Guide to the Routine Maintenance Using the System
Monitor Interface

NetBackup 5020

Routine Maintenance

4-12

Symantec Corporation Issue 01 (2010-12-10)

Parameter

Description

ErrorStatus

RAID group status.



If the value of ErrorStatus is

, it indicates that a RAID group is

working normally.



If the value of ErrorStatus is

, it indicates that a RAID group is

working abnormally.

----End

Exception Handling

If the RAID group is in the

Degraded

state, contact the technical support engineers if the

RAID group does not successfully rebuild automatically.

4.5 Checking the Fan Status

This section describes how to check the fan status on the system monitoring interface. By
checking the fan status, you can know whether the fan works normally.

Impact on the System

None.

Reference Standard

The normal state of a fan is

Device Present

Procedure

Step 1

For the detailed procedure, see

Log into the system monitoring interface

Step 2

Expand the node in the navigation tree, and then click

Fan

, as shown in

Figure 4-12

Summary of Contents for NetBackup 5020





























































Search results

Summary of Contents for NetBackup 5020

Reviews:

Related manuals for NetBackup 5020

Brands by name

Popular brands

Symantec NetBackup 5020, Routine Maintenance

Search results

Summary of Contents for NetBackup 5020

Reviews:

Related manuals for NetBackup 5020

Brands by name

Popular brands