Symantec NetBackup 5020, Routine Maintenance

Page: 35 / 60

NetBackup 5020
Routine Maintenance 4 Guide to the Routine Maintenance Using the System
Monitor Interface
Issue 01 (2010-12-10) Symantec Corporation 4-5
Parameter Description
Type Alarms can be classified into the following types:
 Power Supply : power module

Cooling Device : fan in position

Fan : fan speed
 Temperature : temperature sensor

Voltage : voltage sensor
 System ACPI Power State : status of system ACPI power supply
 Physical Security : sub-rack intrusion
 Reserved : self-defined
Source The device on which the alarm is generated.
Description Detailed alarm information.
The format is: alarm description|action; the value of action can be
Deasserted or Asserted :
 Deasserted : clearing alarms
 Asserted : alarm
----End
Exception Handling
Collect alarms. Based on the alarm, troubleshoot the problem by referring to “System
Alarm/Location Indicator Is Red On” in the
NetBackup 5020 Hardware Troubleshooting .
4.2 Checking the CPU Status
This section describes how to check the CPU status on the system monitoring interface. By
checking the status of the CPU, you can know whether the CPU works normally.
Impact on the System
None.
Reference Standard
If the CPU is in the Presence detected state, it indicates that the CPU is running normally.
Procedure
Step 1
Log in to the system monitoring interface.
For the detailed procedure, see Log into the system monitoring interface .
Step 2
Expand the node in the navigation tree, and then click CPU , as shown in Figure 4-6 .