NetBackup 5020
Routine Maintenance
3 Guide to Routine Maintenance on Equipment Site
Issue 01 (2010-12-10)
Symantec Corporation
3-9
−
If the indicator remains off, unplug and then plug in the disk module.
−
If the problem persists, replace the disk module.
−
If the problem still persists, contact technical support.
Power running/alarm indicator
−
If the power running/alarm indicator blinks orange, see Symptom 1 mentioned in
"Power Module Alarm" in the
NetBackup 5020 Hardware Troubleshooting Guide
.
−
If the power running/alarm indicator remains off, reinsert the power module.
−
If the problem persists, replace the power module.
−
If the problem still persists, contact technical support.
Fan running/alarm indicator
−
If the fan running/alarm indicator blinks orange, see "Fan Running/Alarm Indicator Is
Red On" in the
NetBackup 5020 Hardware Troubleshooting Guide
.
−
If the fan running/alarm indicator remains off, unplug and then plug in the fan
module.
The NetBackup 5020 must be powered off before replacement of a fan. A scheduled outage
period must be arranged.
−
If the problem persists, replace the fan module.
−
If the problem still persists, contact technical support.
Link indicator for the IPMI management network port
−
If the link indicator remains off, unplug and then plug in the network cable.
−
If the problem persists, replace the network cable.
−
If the problem still persists, contact technical support.
Link indicator for the service network port (NIC1/NIC2)
−
If the link indicator remains off, unplug and then plug in the network cable.
−
If the problem persists, replace the network cable.
−
If the problem still persists, contact technical support.
ACT/LNK indicator for the 10GE NIC
−
If the ACT/LNK indicators for the 10GE NIC remains off, unplug and then plug in
the network cable.
−
If the problem persists, replace the network cable.
−
If the problem still persists, contact technical support.
