Symantec NetBackup 5020, Routine Maintenance

Page: 26 / 60

3 Guide to Routine Maintenance on Equipment Site
NetBackup 5020
Routine Maintenance
3-6 Symantec Corporation Issue 01 (2010-12-10)
Location Type Color Status Description
indicator
Blinking A fault occurred on the
power module.
Orange On The device is being located
a
.
- Off The device is running
normally.
SATA disk
module Disk online
status indicator Green On The disk is powered on.
Red On
A disk alarm occurred or
the device is being located
a
.
- Off The disk is not powered on.
Disk read/write
status indicator Green Blinking The device is transferring
data.
- Off The device is not
transferring data.
a: A location command is sent through the management system.

Check indicator status in the rear view of the NetBackup 5020
Figure 3-2 shows the rear view of the NetBackup 5020.
Table 3-4 lists the indicator status of the rear view of NetBackup 5020.
Figure 3-2 Rear view
1 Power running/alarm
indicator 2 Link indicator for the service network interface
(NIC1/NIC2)
3 Active indicator for the
service network interface
(NIC1/NIC2) 4 Active indicator for the IPMI management
network interface