Backlight
Energy saving
<Exit
Select>
Basescreen mode
Backlight
......................
Backlight 1/2
<Exit
Brightness [30%]
Figure 17. Image for selecting backlight and the backlight function..
1. Go to the Service menu.
2. Highlight Settings.
3. Press OK or the
►
Right key.
4. To highlight the Backlight mode.
5. Press OK or the
►
Right key.
6. Change by pressing the
▲
UP key or
▼
DOWN key to choose between
backlight brilliance and duration settings
7. Press OK to confirm the change and return to the Settings menu.
8. Return to the Service menu by pressing the
◄
Left key.
Basescreen mode for selecting analogue or digital
temperature display
Backlight
<Exit
Select>
Basescreen mode
Set point step
......................
Basescreen mode
<Exit
Figure 18. Image for selecting the basescreen mode and image for the Basescreen mode
function..
1. Go to the Service menu.
2. Highlight Settings.
3. Press OK or on the
►
Right key.
4. Highlight the Basescreen mode.
5. Press OK or the
►
Right key.
6. Change by pressing the
▲
UP key or
▼
DOWN key to choose between
analogue or digital display.
7. Press OK to confirm the change and return to the Settings menu.
8. Return to the Service menu by pressing the
◄
Left key.
[Analog]
CONDUCTOR
W4
50
Swegon reserves the right to make design changes.. 20210201
Summary of Contents for 20210201
