Changes in the Main image
To set the desired room temperature
Figure 4. The main image (Analogue and digital variant with and without decimal).
1. Check that the main image is shown in the display.
2. Press on:
• The
▲
UP key to raise the temperature.
• The
▼
DOWN key to lower the temperature.
3. Press OK or wait 3 seconds to confirm the setting.
To set the desired airflow
Figure 5. Main image.
1. Check that the main image is shown in the display.
2. Press on:
• The
►
Right key to increase the airflow.
• The
◄
Left key to decrease the airflow.
3. Press OK or wait 3 seconds to confirm the setting.
Low airflow corresponds to the ECON operating mode. Normal airflow
corresponds to th AUTO operating mode. High airflow corresponds to the
BOOST operating mode.
41
20210201 Swegon reserves the right to make design changes.
CONDUCTOR
W4
Summary of Contents for 20210201
