Swegon 20210201, Technical Manual, Page: 44 / 72

Set the cut-in temperature for cooling and heating
Service Menu
<Exit
Select>
Regulator adjust
Settings
......................
Temp C
Temp H
20
20
Next>
OK select
<Prev.
Figure 8. Image for selecting Regulator adjustment settings and image for setting the cut-in
temperature for cooling and heating.
1. Go to the Service menu.
2. Highlight the Regulator adjustment settings.
3. Press OK or on the
►
Right key.
4. Press the
►
Right key three times to show the image for setting the
cut-in temperature for cooling and heating.
5. Highlight the line of the value (cooling or heating) you want to change
by pressing the
▲
UP or
▼
DOWN key.
6. Press OK to highlight and to be able to change the cut-in temperature.
7. Change the cut-in temperature by pressing the
▲
UP or
▼
DOWN key.
8. Press OK to confirm the change.
9. Press the
◄
Left key four times to return to the Service menu.
View current flows in the air ducts
Service Menu
<Exit
Select>
Regulator adjust
Settings
......................
<Prev.
Exit>
Flow SA1 l/s
Flow SA2 l/s
Flow EA l/s
30
60
90
Figure 9. Image for selecting RE settings and image for setting the existing airflows.
1. Go to the Service menu.
2. Highlight the Regulator adjustment settings.
3. Press OK or on the
►
Right key.
4. Press the
►
Right key four times to show the image for current flows in
the supply air ducts and in the extract air duct.
5. Return to the Service menu by pressing the
►
Right key.
CONDUCTOR W4
44
Swegon reserves the right to make design changes.. 20210201