Modular UPS 25KVA~900KVA User Manual 41
UPS and Module Control Panel
Attention
When bypass frequency is over track, there is interruption time(less than 10ms) for transferring
from bypass to inverter.
4.3.3 LCD touch Screen
Users can easily browse the information, operate the UPS, and set the parameters
through the LCD touch screen, which is friendly for users.
After the monitoring system starts self-test, the system enters the home page,
following the welcome window. The home page is shown in Fig.4.4.
Fig.4-4 Home page
Home page consists of Status bar, Information display, warning information and main
menu.
z
Status bar
The Status bar contains the model of the product, capacity, operational mode , and
the number of the power module and the time of the system.
z
Warning Information
Display the warning information of the cabinet.
z
Information Display
Users can check the information of the cabinet in this area.
The bypass voltage, main input voltage, battery voltage, and output voltages are
presented in the form of gauge.
The loads are displayed in the form of bar chart in percentage. The green area
stands for a load of less than 60%, yellow area for a load of 60%-100% and red
area for a load of more than 100%.
The energy flow mimics the flow of the power.
z
Main Menu
The main menu includes Cabinet, Module, Setting, log, Operate and Scope. Users
can operate and control the UPS, and browse all measured parameters through
main menu.
