UPS and Module Control Panel
54 Modular UPS 25KVA~900KVA User Manual
TEST COMMAND
z
Battery Test
By touching the icon
，
the system transfer to the Battery mode to test the
condition of the battery. Ensure the bypass is working normally and the capacity of
the battery is no less than 25%.
z
Battery Maintenance
By touching the icon
, the system transfers to the Battery mode. This
function is used for maintaining the battery, which requires the normality of the
bypass and minimum capacity of 25% for the battery.
z
Battery Boost
By touching the icon
, the system starts boost charging.
z
Battery Float
By touching the icon
, the system starts float charging.
z
Stop Test
By touching the icon
, the system stops battery test or battery maintenance.
4.4.6 Scope
Touch the icon
, (At the bottom right of the screen), and the system enters the
page of the Scope, as it is shown in Fig.4-13.
Fig.4-13 Scope Menu
Users can view the waves for output voltage, output current and bypass voltage by
touching the corresponding icon in the left side of the interface. The waves can be
zoomed in and zoom out.
z
Touch the icon to display the 3 phase output voltage.
