Modular UPS 25KVA~900KVA User Manual 51
UPS and Module Control Panel
49
Rectifier Over Temp.-Clear
Event above disappears
50
Fan Fail-Set
N# Power Module Fan Fail
51
Fan Fail-Clear
Event above disappears
52
Output Overload-Set
N# Power Module Output Over Load
53
Output Overload-Clear
Event above disappears
54
Inverter Overload Tout-Set
N# Power Module Inverter Over Load Timeout
55
INV Overload Tout-Clear
Event above disappears
56
Inverter Over Temp.-Set
N# Power Module Inverter Over Temperature
57
Inverter Over Temp.-Clear
Event above disappears
58
On UPS Inhibited-Set
Inhibit system transfer from bypass to UPS (inverter)
59
On UPS Inhibited-Clear
Event above disappears
60
Manual Transfer Byp-Set
Transfer to bypass manually
61
Manual Transfer Byp-Set
Cancel to bypass manually
62
Esc Manual Bypass-Set
Escape transfer to bypass manually command
63
Battery Volt Low-Set
Battery Voltage Low
64
Battery Volt Low-Clear
Event above disappears
65
Battery Reverse-Set
Battery pole (positive and negative) are reverse
66
Battery Reverse-Clear
Event above disappears
67
Inverter Protect-Set
N# Power Module Inverter Protect ( Inverter Voltage
Abnormal or Power Back feed to DC Bus)
68
Inverter Protect-Clear
Event above disappears
69
Input Neutral Lost-Set
Input Grid Neutral Lost
70
Bypass Fan Fail-Set
Bypass Module Fan Fail
71
Bypass Fan Fail-Clear
Event above disappears
72
Manual Shutdown-Set
N# Power Module Manually Shutdown
73
Manual Boost Charge-Set
Manually Battery Boost Charge
74
Manual Float Charge-Set
Manually Battery Float Charge
75
UPS Locked-Set
Inhibit to shut down the UPS
76
Parallel Cable Error-Set
Parallel cable in error
77
Parallel Cable Error-Clear
Event above disappears
78
Lost N+X Redundant
Lost N+X Redundant
79
N+X Redundant Lost-Clear
Event above disappears
80
EOD Sys Inhibited
System is inhibited to supply after the battery is
EOD (end of discharging)
81
Power Share Fail-Set
Power share is not in balance
82
Power Share Fail-Clear
Event above disappears
83
Input Volt Detect Fail-Set
Input Voltage is abnormal
84
Input Volt Detect Fail-Clear
Event above disappears
85
Battery Volt Detect Fail-Set
Battery Voltage is abnormal
86
Batt Volt Detect Fail-Clear
Event above disappears
87
Output Volt Fail-Set
Output Voltage is abnormal
